Roof Fastening Calculator
Calculate the Required Anchor Pattern for Pressures Above the Maximum Pressure
                                                                   ASCE 7-10                            Version 14.0                  09/05/2019
Exposure Category:
Enclosure Type:
Wind Speed: mph
Roof Type:
Eave Height: ft
Ridge Height: ft
Building Length: ft
Building Width: ft
RESULTS

INVALID WITHOUT
ENGINEER SEAL

Zone 1:
Zone 2:
Zone 3:
Zone 2H: ----
Zone 3H: ----
When you're finished with the above, press "Next page" above to enter project information and submit for review and certification.

TO SAVE YOUR WORK:

1) Click the red “SAVE, SHARE & SYNC” button above.

2) Enter a key phrase or word in the “secret key” field and click the blue “Connect” button. You are connected if the white cloud turns green.

3) Return to your project by clicking the red “SAVE, SHARE & SYNC” Sync button, entering your secret key, and clicking the blue “Connect” button.

Share your project by clicking “Share the Link” after connecting and copying the link to send to coworkers, colleagues, and clients!

                                                                   ASCE 7-10                            Version 14.0                 09/05/2019
NOA Number:
System Type in NOA:
Fastener:
ex. 11 ga. Annular ring shank nail & 1-5/8" diameter tin caps
x Spacing: in.
y Spacing: in.
Maximum Pressure: psf
RESULTS

INVALID WITHOUT
ENGINEER SEAL

Zone 1:
Zone 2:
Zone 3
Zone 2H:
Zone 3H:
When you're finished with the above, press "Next page" above to enter project information and submit for review and certification.

TO SAVE YOUR WORK:

1) Click the red “SAVE, SHARE & SYNC” button on the first page.

2) Enter a key phrase or word in the “secret key” field and click the blue “Connect” button. You are connected if the white cloud turns green.

3) Return to your project by clicking the red “SAVE, SHARE & SYNC” Sync button, entering your secret key, and clicking the blue “Connect” button.

Share your project by clicking “Share the Link” after connecting and copying the link to send to coworkers, colleagues, and clients!

 
CONTRACTOR & JOB INFORMATION  
Contractor Name:  
                             
Contractor Address:  
                             
Contractor City/State:
           
                             
Job Name:  
                             
Job Address:  
                             
Job City/State:
           
                             
                             
  If you're done with the above, go on top and click on "Order Engineering" to submit for review and certification      
                             
      Internal code:            
          (Code is for admin use only)