Pre-Manufactured Mullion Capacity Calculator 
Inputs
        STEP 1: Configuration of the Mullion
           
 Orientation of the Mullion being analyzed
How is it loaded 
        STEP 2: Frame Dimension              
Width 1 ft in
Width 2 ft in
Tributary Width (1/2 Width 1 + 1/2 Width 2)
Length ft in
                                                   
        STEP 3: Loading               
Wind Pressure (psf, ASD)
Click to determine wind pressure
        STEP 4: Frame Member Information   Deflection Help :     
Deflection Limit                                 L  /  
Section A
Metal Type
Manufacturer
Website : 
Metal Alloy
Member Shape
Want your shape added ? 
contact us 
                                                   
                    Want a custom shape added ?                   
                                                   
                                                   
RESULTS
                           
                 
  Member Design Checks                      
Deflection 
Moment
NOTE: RESULTS ARE NOT VALID WITHOUT AN ORIGINAL SIGNATURE AND
RAISED SEAL BY A LICENSED PROFESSIONAL ENGINEER.
THIS IS A DESIGN AID
ONLY FOR PRELIMINARY ANSWERS. OBTAIN AN ENGINEERING REVIEW PRIOR
TO USING ANY RESULTS FROM THIS TOOL.
THIS TOOL DOES NOT CHECK ANY LARGE MISSILE IMPACT OR CYCLICAL FORCES
 THAT MAY BE IMPOSED ON THE SYSTEM.
RESULTS ARE VALID FOR STATIC
LOAD ONLY.
                       
                                                   
            Want a more specific analysis ?  contact us                     
                                                   
                                                   
 
                                                   
TO SAVE YOUR WORK:

1.  Click Real Time Sync below, Enter A unique name, click connect.
2.    When you return, open Real Time Sync, type your code, press connect, work will be restored.
3.   You can click on "Share the link" and send it to your coworkers for you to collaborate.