What wind information is required for construction documents?
From the 5th, 6th &7th Edition of the Florida Building Code (2014, 2017, 2020) section 1603.1.4 as well as from section 1603.1.4. of the 2012,
Engineering Support For Diversitech Pads & Related Accessories
A Structural design service brought to you by Engineering Express®
Browse & Purchase Certified Engineering Plans For Permit
Purchase engineer-certified pre-engineered structural performance evaluation reports & receive an engineer-certified hardcopy or digital report for use in permitting throughout the US.
Diversitech: 230-B3M/L & 230-B2XL Wall Bracket Technical Evaluation
$100.00
or ( 10 Tokens – 10 Tokens )View
DiversiTech: Concrete Pads for Champion Air-Cooled Generators
Price range: $35.00 through $60.00
or ( 3.5 Tokens )View
DiversiTech: Concrete Pads for Generac “Next Generation” Air Cooled Generators
Price range: $35.00 through $60.00
or ( 3.5 Tokens )View
DiversiTech: Concrete Pads for Kohler Generators
Price range: $35.00 through $60.00
or ( 3.5 Tokens )ViewDiversiTech: Double Concrete Generator Pad
Price range: $35.00 through $60.00
or ( 3.5 Tokens – 6 Tokens )View
DiversiTech: Exp. C Up to 150 MPH – Foam-Core Pad Report For Mechanical Unit Installation Permit
Price range: $35.00 through $60.00
or ( 3.5 Tokens – 6 Tokens )View
DiversiTech: Exp. C Up to 175 MPH – Foam-Core Pad Report For Mechanical Unit Installation Permit
Price range: $35.00 through $60.00
or ( 3.5 Tokens – 6 Tokens )ViewDiversiTech: GenPad™ Concrete Pads for Generac Generators
Price range: $35.00 through $60.00
or ( 3.5 Tokens )View
DiversiTech: Ground Anchor Retrofit Letter 22-53405
Price range: $60.00 through $80.00
or ( 6 Tokens )View
Diversitech: Quick Sling Minisplit Superstands QSMS4002 and Variants
Price range: $60.00 through $80.00
or ( 6 Tokens – 8 Tokens )View
Diversitech Products Are Florida Product Approved
Compliments of EngineeringPlans.com
Request a Site-Specific Pad Plan Or Modification of A Diversitech Plan For Permitting
ExpressPass – The Engineering Express Project Management System
Reimagined for Q3 2026 with the help of AI. It’s everything you need to get your project quoted and designed FAST.
Request your access code today & discuss your needs with one of our design experts.
NOTE: This is NOT for homeowners, only qualifying businesses. Homeowners can select from hundreds of pre-engineered plans by accessing our Plan Store.
Forgot your code? Email Me My Code
Looking to log in to your Online Plan Store account instead? Click Here
Live Engineering Support
8:30-5pm Eastern Monday – Friday
or send us a message
Call or Text Engineering Express at 954-354-0660
Other Diversitech Resources
Help Center
What is a TER and how is it used for permitting?
TER – Technical Evaluation Report (Product Performance Evaluation) Explained A TER or Technical Evaluation Report, is an engineering evaluation based on testing and/or rational analysis
What Doesn’t A Technical Evaluation Report (TER) or Product Evaluation Do?
What’s A TER? A TER, or Technical Evaluation Report, are engineer-certified, code-compliant evaluation of a building products performance limitations. They provide limiting capacities for wind,
What are The Span Limitations of Large Missile Impact Doors – Windows – Shutters?
Size Limitations For Impact Rated Products A Frequent question is what are the span, height, pressure, and installation limitations for large & small missile impact
Technical Evaluation Report – TER – Types of Product Evaluations Typically Performed By Engineering Express
Engineering Express provides structural design evaluations of various types of mechanical equipment exposed to weather. There are four (4) evaluation types typically performed, each with
Roof Mounted Equipment Height Requirements
In accordance with FBC 2020 (7th Edition), the following clearance below raised roof mounted mechanical units applies inside & outside the HVHZ*: WIDTH** OF MECHANICAL
Pros and Cons of Obtaining a Florida Statewide Approval Vs A Miami Dade Approval and how a TER fits in
Which Florida Approval Is Right for You? Pros and Cons of FSA, NOA, and TER Two common means of product evaluations in Florida are Florida
Product Performance Evaluations & TER’s Explained
What is a Product Performance Evaluation & A TER? A product performance evaluation or TER (Technical Evaluation Report) is a set of general instructions describing
PRODUCT APPROVALS ARE NOT ALWAYS REQUIRED! HERE’S WHY:
3 Myths About Product Approval Requirements Background Product evaluations (also referred to as “product approvals”, “ICC reports”, Miami Dade NOA’s, TDI Evaluations, or similar) for
Performance Limitations for Mechanical Equipment & TER Certifications
Summary of Building Code & Research Intent The intent & provisions of the 2018 International Building Code (IBC), 2018 International Residential Code (IRC) & 2020
Metal Fasteners UNC vs Spaced Thread
Overview Metal fastening is designed per the requirements of the American Institute of Steel Construction (AISC): Specification for Structural Steel Buildings in conjunction with the
Learn About Rooftop & Ground Wind Forces for Mechanical Units
Want to learn how to design AC units on stands or curbs for wind design? Are you looking for tools to help in in design?
Instructions for proper use of rooftop equipment wind pressure calculator
HELP PAGE For the Engineering Express® Rooftop Equipment Wind Pressure Calculator Note: See Limitations & Conditions of Use at the end of this article. Quick
Impact Requirements For Mechanical Equipment in the Florida Building Code & For Essential Facilities
Mechanical Equipment – Does It Need To Qualify For Large Missile Impact? Questions frequently arise as to what the rule is in Florida, Miami, and
I see values for F1 and F2 on Evaluation Reports. What are they?
F1 and F2 are the limiting performance capacities of the forces in the parallel and perpendicular directions of a building component. Which one is which
How do I get a Certified TER or Master Plan Sheet?
What’s a TER & Master Plan? TER’s or Technical Evaluation Reports (formally ‘Master Plans’) are Evaluation Reports That describe the limitations of use for a
Guide To Mechanical Unit Permits and Engineering Requirements In Florida & The US
Mechanical Equipment Design – A National Requirement Generally speaking, building codes are national in nature, but are adopted locally for unique geographic conditions. While national
Florida Statewide Approvals (FSA) – Quality Assurance and Validator Requirements
Florida Statewide Approvals (FSA): Validator & Quality Assurance Requirements Florida’s Statewide Product Approval (FSA) system ensures that every product used in construction meets the state’s
Florida Product Approval and Miami Dade NOA Requirements
Florida Product Approval & Miami-Dade NOA : What You Need to Know Florida Building Code (FBC) vs International Building Code (IBC) Florida stands out as
FAQ: What do I do if a TER or Generic Performance Evaluation isn’t approved for a permit?
Why Your TER Might Get Rejected — and How to Fix It A Technical Evaluation Report (TER) is an engineer-certified evaluation of a product’s structural
FAQ Search our AC model Database
Click Here to access our model database tool. You can filter by your AC brand, model, and number to find the TER report you need