Purchase certified designs for pads, stands, and design aids to assist in your project design & permitting
Showing 1–15 of 44 results
Use these design tools for estimating important structural concepts such as wind pressure, pad & stand adaptation. Order certified results for permit.
Two common means of product evaluations in Florida are Florida Statewide Approvals (FSA’s) and Miami-Dade Notices of Acceptance (NOA’s). To help determine whether these evaluations
Click Here to access our model database tool. You can filter by your AC brand, model, and number to find the TER report you need
Use this tool to search and find the applicable Technical Evaluation Report for your installation.
F1 and F2 are the limiting performance capacities of the forces in the parallel and perpendicular directions of a building component. Which one is which
Want to learn how to design AC units on stands or curbs for wind design? Are you looking for tools to help in in design?
HELP PAGE For the Engineering Express® Rooftop Equipment Wind Pressure Calculator Note: See Limitations & Conditions of Use at the end of this article. Quick
We are frequently asked what are the limitations applied on Small Missile Impact and Large Missile Impact products. Engineering Express takes into consideration the following
From the 5th, 6th &7th Edition of the Florida Building Code (2014, 2017, 2020) section 1603.1.4 as well as from section 1603.1.4. of the 2012,
In accordance with FBC 2020 (7th Edition), the following clearance below raised roof mounted mechanical units applies inside & outside the HVHZ*: WIDTH** OF MECHANICAL
Overview Metal fastening is designed per the requirements of the American Institute of Steel Construction (AISC): Specification for Structural Steel Buildings in conjunction with the
Questions frequently arise as to what the rule is in Florida, Miami, and the HVHZ zone (Dade and Broward Counties, FL) under the Florida Building
Engineering Express provides structural design evaluations of various types of mechanical equipment exposed to weather. There are four (4) evaluation types typically performed, each with
About Validators & Quality Assurance Compliance It is often asked of us to explain the validator and quality assurance requirements of the Florida Statewide Product
WHAT IS A MASTER PLAN SHEET / PRODUCT EVALUATION / TER? A master plan, also known as a product evaluation or TER (Technical Evaluation Report)
HERE’S 3 MYTHS ABOUT PRODUCT APPROVALS: Background: Product evaluations (sometimes called “product approvals”, “ICC reports”, NOA’s or similar) for building components are the general
Product Approvals for building components are the general rule in Florida. Building officials, architects, insurance companies, even homeowners ask for them all the time, frequently
DENIED – YES OR NO? While plan reviewers, inspectors, and other building officials have the authority to question any document submitted if the document complies
WHEN IS A FLORIDA PRODUCT APPROVAL OR MIAMI DADE NOA REQUIRED & HOW TER’S AND MASTER PLANS FIT IN FIRST, A WORD ABOUT FLORIDA &
THE BUILDING DEPARTMENT WON’T ACCEPT MY TECHNICAL EVALUATION REPORT (TER)? Sometimes, municipalities or contract documents require more information than just submitting a TER (Technical Evaluation
FIRST, WHAT’S A CERTIFIED TER & Master Plan Sheet? TER’s or Technical Evaluation Reports and Master Plan Sheets must bear the original signature and raised
