BROWSE OVER 200 PLANS & CALCULATORS

This certification is applicable to the DAIKIN ductless units, double fan and single fan. The certification is sold as an engineered sealed Evaluation Report and meets the requirements of the structural wind integrity per the selected building code above using ASCE 7-10 for the approval of unit housing and tie-down clip capacities, and upon ordering will…
From $30
This WCX12-AB & WCX12-BB wind certification and ‘through-the-wall’ host installation engineering is applicable to the First Company WCX Units. This document has been designed to meet the requirements of the selected building code above using ASCE 7-10, and upon ordering will be signed and sealed by a Professional Engineer of the firm. Use it in conjunction with…
From $30
This certification is applicable to the DAIKIN Ductless unit types, models RXN_NMVJU, RX_NMVJU, RXL_NMVJU, RK_NMVJU, RKN_NMVJU, RXL_QMVJU small cabinets capacities 09, 12, and large cabinets capacities 15, 18, 24 units. This certification is also applicable to large cabinets (2/3/4) M (K/KN/X/XL/XN) (S/L)_(Q/N)MVJU capacities 18, 24, 36 units. Example: small cabinet RXN09NMVJU; large cabinet RXN24NMVJU; large cabinet…
From $30
This certification is applicable to the DAIKIN VRV unit types. The certification is sold as an engineered sealed Evaluation Report and meets the requirements of the structural wind integrity per the selected building code above using ASCE 7-10 for the approval of unit housing and tie-down clip capacities, and upon ordering will be signed and sealed…
From $30
This certification is applicable to the Rheem residential air handler unit types and is available as a sealed drawing. The certification is sold as an engineered sealed document and meets the requirements of the selected building code above using ASCE 7-10 for the approval of unit housing and tiedown clip capacities, and upon ordering will be signed…
From $30.00
This certification is applicable to the Ingersoll Rand “American Standard BAYECMT023”, “American Standard BAYECMT0004”, “Trane BAYECMT023”, and “Trane BAYECMT0004” unit types. The certification is sold as an engineered sealed Evaluation Report and meets the requirements of the selected building code using ASCE 7-10 for the approval of unit housing and tiedown clip capacities. Use it in conjunction with…
From $30.00
This certification is applicable to the Ingersoll Rand “American Standard BAYECMT023”, “American Standard BAYECMT0004”, “Trane BAYECMT023”, and “Trane BAYECMT0004” unit types. The certification is sold as an engineered sealed Evaluation Report and meets the requirements of the selected building code above using ASCE 7-10 for the approval of unit housing and tiedown clip capacities. Use it in…
From $30.00
Follow the instructions below: Complete your calculations from this page: http://miamitech.com/as14calc/as14calc.html From the calculator, click the “Submit” button and find the calculator reference # and submittal data. Look at the second product image on this page for specifics. Enter the reference # and submittal data into the textboxes above. Checkout and pay to complete purchase. If…
From $75.00
This certification is applicable to the Ingersoll Rand “American Standard BAYECMT023”, “American Standard BAYECMT0004”, “Trane BAYECMT023”, and “Trane BAYECMT0004” unit types and is available as either a drawing, a letter, or as a drawing and letter combined together. They are intended for use together, however in certain cases only the letter or only the drawing may…
From $20
This certification is applicable to the DiversiTech GenPad™ Concrete Generator Pads and is available as a drawing detail with a chart listing approved sizes and wind pressure loads. The certification is sold as an engineered sealed document and meets the requirements of the selected building code above, and upon ordering will be signed and sealed by a…
From $20
These charts are sold as engineered sealed documents and meet the requirements of the selected Florida Building Code using “ASD METHOD” ASCE 7-10 for the determination of wind pressures acting upon mechanical equipment using either the “At-Grade Sign” method or “Rooftop Structures” method (rooftop structures method per FBC 1609.8). The selected FBC allows a permit applicant to submit…
From $
This certification is applicable to the Johnson Controls RESPAC Unit. The certification is sold as an engineered sealed Evaluation Report and meets the requirements of the structural wind integrity per the selected building code above using ASCE 7-10 for the approval of unit housing and tie-down clip capacities, and upon ordering will be signed and sealed…
From $30

Note: Engineering Express may partner with third parties to properly administer requests from this website. We do not claim to be able to natively provide engineering services in all jurisdictions listed. Contact the office at the information listed below if more information is needed. This site serves as a method of collecting information only on behalf of our clients.