BROWSE OVER 200 PLANS & CALCULATORS

NEW AND IMPROVED FOR THE 2017 Florida Building Code! Easy Instructions Expanded Zone 4/5 explanations Easier To Read Wind Pressures Digital Seal Ready These charts are sold as engineered sealed documents and meet the requirements of the selected Florida Building Code (FBC) using “ASD Method” per ASCE 7-10 for the determination of required wind pressures…
From $15
This plan provides structural details for a masonry wall and fence up to the dimensions and limitations on the plan. Use it in conjunction with your fenestration and other building plans to obtain a permit for modification of the structure. Please note that egress and other non-structural requirements are outside the scope of this plan…
From $75.00
This plan provides structural details for blocking in a masonry opening up to the dimensions and limitations on the plan. It uses a filled cell as a termination cell to provide an opening to which fenestration can be applied. Use it in conjunction with your fenestration and other building plans to obtain a permit for…
From $75.00
This plan provides structural details for closing in a masonry opening up to the dimensions and limitations on the plan. An option is provided for complete block in or to leave an open space above the block-in. Use it in conjunction with your fenestration and other building plans to obtain a permit for modification of…
From $75.00
This certification is applicable to the Elite 630 Series Window. It includes numerous dimensions, wind speed/pressures, and component options for many common Elite Aluminum applications. It is sold as engineered sealed documents and meet the requirements of the applicable building code using ASCE 7-10 for the approval of structural adequacy only. Use It in conjunction…
From $30.00
This certification is applicable to the Elite 3000 Door Impact. It includes numerous dimensions, wind speed/pressures, and component options for many common Elite Aluminum applications. It is sold as engineered sealed documents and meet the requirements of the applicable building code using ASCE 7-10 for the approval of structural adequacy only. Use It in conjunction with…
From $30.00
This certification is applicable to the Elite 3000 Door Non Impact. It includes numerous dimensions, wind speed/pressures, and component options for many common Elite Aluminum applications. It is sold as engineered sealed documents and meet the requirements of the applicable building code using ASCE 7-10 for the approval of structural adequacy only. Use It in conjunction…
From $30.00
This certification is applicable to the structural wind attachment of the ‘Accordion Shutter Sill Mount’. It is sold as an engineered sealed master plan document (non site-specific) and meets the requirements of the applicable building code using ASCE 7 for the approval of structural wind adequacy only. Use it in conjunction with your other approved…
From $30.00
This certification is applicable to the Decorative Bahama/Colonial Non-Impact Shade System. It contains numerous dimension, wind speed/pressure, and component options for many common Town & Country applications. It is sold as an engineered sealed document and meets the requirements of the applicable building code using ASCE 7-10 for the approval of structural adequacy only. Use…
From $20
This certification is applicable to the Wayne Dalton Fabric Shield™ Impact Protection System for use in the states listed here-in. Use this plan in conjunction with your other approved documents to obtain a building permit. Installation variations and site specific drawings outside the scope of this plan can be quoted using our online smart request…
From $
This 2X wood buck master plan sheet provides installation details for concrete or wood attachments using mechanically attached screws. It has been designed to meet the requirements of the selected Building Code inside and outside the HVHZ1. Use it along with your other project documents to obtain a building permit. This certification is generic and installations…
From $25
This master plan sheet certifies the use of a 2 X 6 X 1/4″ tube continuously connected mullion and attachment to the host structure to accommodate multi-story accordion shutter installations. It can also be used to certify an end span tube and attachment if needed for this tube mullion. This document has been designed to meet…
From $25
This document is for a NON-IMPACT decorative exterior window ornament rated up to the limitations listed within the plan. It is designed to meet wind loads only and NOT to be used as a shutter/impact protection device. It has been designed to meet the requirements of the selected building code above. Use it in conjunction with…
From $25
This document is for a NON-IMPACT decorative exterior window ornament rated up to the limitations listed within the plan. It is designed to meet wind loads only and NOT to be used as a shutter/impact protection device. It has been designed to meet the requirements of the selected building code above. Use it in conjunction with…
From $25.00
This document is for a NON-IMPACT decorative exterior window ornament rated up to the limitations listed within the plan. It is designed to meet wind loads only and NOT to be used as a shutter/impact protection device. It has been designed to meet the requirements of the selected building codes above. Use it in conjunction with…
From $25.00
This document is for a NON-IMPACT decorative exterior window ornament rated up to the limitations listed within the plan. It is designed to meet wind loads only and NOT to be used as a shutter/impact protection device. It has been designed to meet the requirements of the selected building codes above. Use it in conjunction with…
From $25.00
This letter is applicable to Town & Country shutter installations for use along with an existing Product Approval Document. The letter is intended to certify the required size and reinforcement parameters for a footer to be installed to support the base of the shutter during a windstorm event. This document has been designed to meet the…
From $30
These charts are sold as engineered sealed documents and meet the requirements of the selected Florida Building Code using “ASD Method” per ASCE 7-10 for the determination of required wind pressures for Components and Cladding. The selected FBC allows a permit applicant to submit for a garage door installation using the submission of one of these sealed…
From $15
This master plan sheet provides various aluminum tube options to allow shutters to be installed to the head or sill without structural support by use of this engineered span tube mullion. This document has been designed to meet the requirements of the selected Building Code inside and outside the HVHZ1 and upon ordering will be signed and…
From $25
This 1X wood buck master plan sheet provides installation details for concrete or wood attachments using mechanically attached screws. This document has been designed to meet the requirements of the selected Building Code inside and outside the HVHZ1 and upon ordering will be signed and sealed by a Professional Engineer of the firm. Use it along…
From $25

Note: Engineering Express may partner with third parties to properly administer requests from this website. We do not claim to be able to natively provide engineering services in all jurisdictions listed. Contact the office at the information listed below if more information is needed. This site serves as a method of collecting information only on behalf of our clients.