BROWSE OVER 200 PLANS & CALCULATORS

NEW AND IMPROVED FOR THE 2017 Florida Building Code! Easy Instructions Expanded Zone 4/5 explanations Easier To Read Wind Pressures Digital Seal Ready These charts are sold as engineered sealed documents and meet the requirements of the selected Florida Building Code (FBC) using “ASD Method” per ASCE 7-10 for the determination of required wind pressures…
From $15
Easily calculate ASD design wind pressures using ASCE 7-10 Components & Cladding for wind zones 4 & 5 of buildings.
$0 for draft
$80 Sealed
This product is available for purchase as a sealed drawing to certify structural components of this Coastal & Inland Hurricane HVAC Unit Bracket only by Ductmate. The certification meets the requirements of the selected building code above using ASCE 7-10 up to a design pressure of 170psf. Use it in conjunction with your other approved…
From $30.00
This plan provides structural details for an equipment service rack with extension with concrete posts up to the dimensions and limitations on the plan. Use it in conjunction with your fenestration and other building plans to obtain a permit for modification of the structure. Please note that egress and other non-structural requirements are outside the…
From $75.00
This certification is applicable to Structall’s Insulated Patio Cover – Roof Over Open Wall Room Systems with 6″ Gutter Beam. It contains numerous dimension, wind speed/pressure, and component options for many common Structall applications. It is sold as an engineered sealed document and meets the requirements of the applicable building code using ASCE 7-10 for…
From $25.00
This certification is applicable to the General Awnings Austin Standing Seam Awning. It is sold as an engineered sealed document and meets the requirements of the applicable building code using ASCE 7-10 for the approval of structural adequacy only. Use it in conjunction with your other approved documents to obtain a building permit. This certification…
From $50.00
This certification is applicable to the Tradewinds Type D Aluminum Generator Housing Unit Anchorage. The certification is sold as an engineered sealed Evaluation Report and meets the requirements of the structural wind integrity per the selected building code above using ASCE 7-10 for the approval of unit housing and tie-down clip capacities. Use it in…
From $30
This certification is applicable to the Tradewinds Type C Aluminum Generator Housing Unit Anchorage. The certification is sold as an engineered sealed Evaluation Report and meets the requirements of the structural wind integrity per the selected building code above using ASCE 7-10 for the approval of unit housing and tie-down clip capacities. Use it in…
From $30
This certification is applicable to the Tradewinds Type B Aluminum Generator Housing Unit Anchorage. The certification is sold as an engineered sealed Evaluation Report and meets the requirements of the structural wind integrity per the selected building code above using ASCE 7-10 for the approval of unit housing and tie-down clip capacities. Use it in…
From $30
This certification is applicable to the Tradewinds Type A Aluminum Generator Housing Unit Anchorage. The certification is sold as an engineered sealed Evaluation Report and meets the requirements of the structural wind integrity per the selected building code above using ASCE 7-10 for the approval of unit housing and tie-down clip capacities. Use it in…
From $30
This certification is applicable to the OZCO Ornamental Wood Ties 2″ High Velocity Rafter Clips (56638 – RC-LS-HV-2) . The certification is sold as an engineered sealed Evaluation Report and meets the requirements of the structural wind integrity per the selected building code above using ASCE 7-10 for the approval of unit housing and tie-down…
From $60.00
This certification is applicable to the Rheem residential air handler unit types and is available as a sealed drawing. The certification is sold as an engineered sealed document and meets the requirements of the selected building code above using ASCE 7-10 for the approval of unit housing and tiedown clip capacities, and upon ordering will be signed…
From $30.00
This engineered plan provides the design details for an aluminum louvered pergola canopy host attached or free-standing, with four posts in a simple two-zone setup and a light track down the center. The design is rated for 115mph winds in exposure B (obstructed terrain) conditions, with posts embedded in new foundations. See our calculation tool…
From $80.00
This engineered plan provides the design details for an aluminum louvered pergola canopy host attached or free-standing, with four posts in a simple one-zone setup. The design is rated for 115mph winds in exposure B (obstructed terrain) conditions, with posts embedded in new foundations. See our calculation tool click here for variations. For site specific projects…
From $80.00
This certification is applicable to the Fortress Evolution Post and Footer. It includes numerous dimensions, wind speed/pressures, design loads, and component options for many common Fortress Framing applications. It is sold as engineered sealed documents and meets the requirements of the applicable building code using ASCE 7-10 for the approval of structural adequacy as well…
From $40.00
This wind certification and host installation engineering is applicable to the First Company WHSC Units. This document has been designed to meet the requirements of the selected building code above using ASCE 7-10, and upon ordering will be signed and sealed by a Professional Engineer of the firm. Use it in conjunction with your other approved documents…
From $30
This certification is applicable to the Town & Country Mobile Home Aluminum Pan Roof-Over Attachment. It contains numerous dimension, wind speed/pressure, and component options for many common Town & Country applications. It is sold as an engineered sealed document and meets the requirements of the applicable building code for the approval of structural adequacy only.…
From $40.00
This certification is applicable to the OZCO Ornamental Wood Ties 8×8 Post Base Kit (56609 – 8×8-PB-LS) . The certification is sold as an engineered sealed Evaluation Report and meets the requirements of the structural wind integrity per the selected building code above using ASCE 7-10 for the approval of unit housing and tie-down clip…
From $60.00
This certification is applicable to the OZCO Ornamental Wood Ties 6×6 Post Base Kit (56608 – 6×6-PB-LS). The certification is sold as an engineered sealed Evaluation Report and meets the requirements of the structural wind integrity per the selected building code above using ASCE 7-10 for the approval of unit housing and tie-down clip capacities,…
From $60.00
This certification is applicable to the OZCO Ornamental Wood Ties 4×4 Post Base Kit (56607 – 4×4-PB-LS). The certification is sold as an engineered sealed Evaluation Report and meets the requirements of the structural wind integrity per the selected building code above using ASCE 7-10 for the approval of unit housing and tie-down clip capacities,…
From $60.00
This certification is applicable to the OZCO Ornamental Wood Ties 8×8 Post Base (54209 – 8×8-PB-LSL). The certification is sold as an engineered sealed Evaluation Report and meets the requirements of the structural wind integrity per the selected building code above using ASCE 7-10 for the approval of unit housing and tie-down clip capacities, and…
From $60.00
This certification is applicable to the OZCO Ornamental Wood Ties 6×6 Post Base (54208 – 6×6-PB-LSL). The certification is sold as an engineered sealed Evaluation Report and meets the requirements of the structural wind integrity per the selected building code above using ASCE 7-10 for the approval of unit housing and tie-down clip capacities, and…
From $60.00
This certification is applicable to the OZCO Ornamental Wood Ties 4×4 Post Base (54207 – 4×4-PB-LSL). The certification is sold as an engineered sealed Evaluation Report and meets the requirements of the structural wind integrity per the selected building code above using ASCE 7-10 for the approval of unit housing and tie-down clip capacities, and…
From $60.00
This certification is applicable to the OZCO Ornamental Wood Ties 8″ Post to Beam Connector (56610 – P2B-LS-8). The certification is sold as an engineered sealed Evaluation Report and meets the requirements of the structural wind integrity per the selected building code above using ASCE 7-10 for the approval of unit housing and tie-down clip…
From $60.00
This certification is applicable to the OZCO Ornamental Wood Ties Bolt Offset Post to Beam (56637 – P2B-BI-LS). The certification is sold as an engineered sealed Evaluation Report and meets the requirements of the structural wind integrity per the selected building code above using ASCE 7-10 for the approval of unit housing and tie-down clip…
From $60.00
This certification is applicable to the OZCO Ornamental Wood Ties 8-10″ Joist Hanger Flush (51770 – JHF-810-IW). The certification is sold as an engineered sealed Evaluation Report and meets the requirements of the structural wind integrity per the selected building code above using ASCE 7-10 for the approval of unit housing and tie-down clip capacities,…
From $60.00
This certification is applicable to the OZCO Ornamental Wood Ties 6-8″ Beam Hanger Flush (51769 – BFH-68-IW). The certification is sold as an engineered sealed Evaluation Report and meets the requirements of the structural wind integrity per the selected building code above using ASCE 7-10 for the approval of unit housing and tie-down clip capacities,…
From $60.00
  This calculator determines the footing and post size for a variety of sign, soil, & wind configurations.
$0 for draft
$125 sealed
This certification is applicable to the Superior Mason – 2 x 3 Screen Room and EPS Panel Roof. It includes numerous dimensions, wind speed/pressures, and component options for many common Superior Mason applications. It is sold as engineered sealed documents and meets the requirements of the applicable building code using ASCE 7-10 for the approval of structural…
From $40.00
This certification is applicable to the Superior Mason – 2 x 3 Screen Room Infill. It includes numerous dimensions, wind speed/pressures, and component options for many common Superior Mason applications. It is sold as engineered sealed documents and meets the requirements of the applicable building code using ASCE 7-10 for the approval of structural adequacy only. Use…
From $40.00
This certification is applicable to the OZCO Ornamental Wood Ties 6-8″ Joist Hanger Tab (56640-JHT-68-LS) and (51740 – JHT-68-IW). The certification is sold as an engineered sealed Evaluation Report and meets the requirements of the structural wind integrity per the selected building code above using ASCE 7-10 for the approval of unit housing and tie-down…
From $60.00
This certification is applicable to the Sundance Louvered Roof by Rain-Out Inc Aluminum Louvered Roof. It has been designed to meet the requirements of the selected Building Code inside and outside the HVHZ1. Use it in conjunction with your other approved documents to obtain a building permit. This certification is generic and installations beyond this scope…
From $50.00
This master plan sheet certifies a variety of installation conditions for Eastern Metal Supply’s Self Mating & Cap and Pan Decking. It certifies a core drill installation for an above-grade condition. This document has been designed to meet the requirements of the selected Building Code inside and outside the HVHZ1 and upon ordering will be signed and sealed by a…
From $30.00
This certification is applicable to the Hardie Boys Decorative Soffit System. It has been designed to meet the requirements of the selected Building Code inside and outside the HVHZ1. Use it in conjunction with your other approved documents to obtain a building permit. This certification is generic and installations beyond this scope or site specific applications…
From $60.00
This plan provides structural details for a masonry wall and fence up to the dimensions and limitations on the plan. Use it in conjunction with your fenestration and other building plans to obtain a permit for modification of the structure. Please note that egress and other non-structural requirements are outside the scope of this plan…
From $75.00
This certification is applicable to the Goodman splits units. The certification is sold as an engineered sealed Evaluation Report and meets the requirements of the structural wind integrity per the selected building code above using ASCE 7-10 for the approval of unit housing and tie-down clip capacities, and upon ordering will be signed and sealed…
From $30

Note: Engineering Express may partner with third parties to properly administer requests from this website. We do not claim to be able to natively provide engineering services in all jurisdictions listed. Contact the office at the information listed below if more information is needed. This site serves as a method of collecting information only on behalf of our clients.