Glazing Design For Boca Raton Regional Hospital M.O.B.
Stunning blue large missile impact curtainwall glass highlights this project in South Florida near the beach. Attention was made to match the parking garage to
PRODUCT EVALUATIONS
| FL # | Model, Number or Name | Description | Installation Instructions | Evaluation Reports |
| 15273.1 | Series Pro-Tech 4SG Structurally Glazed System | Non-impact resistant aluminum structurally glazed storefront system | CLICK HERE TO VISIT THE DOCUMENT | CLICK HERE FOR THE EVALUATION REPORT |
| 15274.1 | Series Pro-Tech 6SG Structurally Glazed System | Non-impact resistant aluminum structurally glazed storefront system | CLICK HERE TO VISIT THE DOCUMENT | CLICK HERE FOR THE EVALUATION REPORT |
| 29520.1 | a-Series Protech 14SG Aluminum Structurally Glazed Curtainwall – LMI / SMI | Series Protech 14SG Aluminum Structurally Glazed Curtainwall – LMI / SMI | CLICK HERE TO VISIT THE DOCUMENT | CLICK HERE FOR THE EVALUATION REPORT |
| 29520.2 | b-Series Protech 7SG Aluminum Structurally Glazed Curtainwall with Sunshade – LMI / SMI | Series Protech 7SG Aluminum Structurally Glazed Curtainwall with Sunshade – LMI / SMI | CLICK HERE TO VISIT THE DOCUMENT | CLICK HERE FOR THE EVALUATION REPORT |
| 29520.3 | c-Series Protech 9SG Aluminum Structurally Glazed Curtainwall with Sunshade – LMI / SMI | Series Protech 9SG Aluminum Structurally Glazed Curtainwall with Sunshade – LMI / SMI | CLICK HERE TO VISIT THE DOCUMENT | CLICK HERE FOR THE EVALUATION REPORT |
| 29520.4 | d-Series Protech 45SG Aluminum Structurally Glazed Curtain Wall (LMI/SMI) | Series Protech 45SG Aluminum Structurally Glazed Curtain Wall (LMI/SMI) | CLICK HERE TO VISIT THE DOCUMENT | CLICK HERE FOR THE EVALUATION REPORT |
GLASS & GLAZING DESIGN AIDS
ASCE 7 Components & Cladding Wall Wind Pressure Calculator
Calculate components & cladding wall pressures for up to 50 openings. Easily order certified copies for review & permit.
CRAWFORD-TRACEY & ENGINEERING EXPRESS NOTEABLE PROJECTS
Anthropologie South Beach Building Envelope
This landmark structure in the hard of South Beach in Miami on Lincoln Road was custom designed for Crawford Tracey Corporation.
One Of A Kind Glazing Design for Joe Dimaggio Hospital in Miami
Special attention to detail was needed to execute this stunning segmented glazing design. Engineering Express provided full shop drawings and engineering for this project for
Engineering Express Designs Building Components For the Brightline Rail Stations
Engineering Express was chosen for numerous component designs for a number of Brightline Rail Stations throughout South Florida. Providing glazing, door, and other accessory feature
MIles of Glazing For Daytona Speedway
It was our great privilege to provide engineering glazing designs for the Daytona Rising project in Daytona Beach, FL. Working with Crawford Tracey Corporation, Engineering
Engineering Express Designs Max Planck Facility At Florida Institute
Engineering Express is on hand at the onset of the Max Planck Facility at the Florida Institute to deliver another commercial glazing project. Part of
KNOWLEDGE BASE
How Do I Get Approval To Substitute Glass Type-Interlayer On My Product Evaluation?
If you are a manufacturer with a Florida or Miami Dade Approval, or if you are trying to install a tested and approved large missile
About Door Product Pressure Ratings and Water Infiltration
QUESTION: Why do certain door products rate a certain p.s.f like -60/+60 then lower ratings are shown throughout the product approval? Usually, the higher
What are Limitations of Small & Large Missile Impact Designs?
We are frequently asked what are the limitations applied on Small Missile Impact and Large Missile Impact products. Engineering Express takes into consideration the following
What are the requirements for using ASTM Missile Level E in Florida (2021 updated)?
In the 7th Edition Florida Building Code (2020), missile level E is valid in and outside of the HVHZ (Broward and Dade Counties) when it
Is a large missile impact window or door automatically approved for small missile impact?
Overview Changes to the 2020 Florida Building Code for Porous Impact Protection Devices Porous Impact Protective Systems: ASTM E1996-12A brought a significant change to Porous
Miami Dade NOA Revision vs Renewal & Fees Explained
As of January, 2021, here is an explanation from Miami Dade County’s Product Approval System (Product Control) on the differences, timeframes, and fees for their
Can you substitute spacers for insulating glass units (IGU)?
The question of whether or not an installer can substitute the spacer that separates the outer from the inner glazing on an insulating glass unit
How do I calculate the effective opening area on window or door products? – What opening area should be used for wind pressure determination on a multi-panel product?
The Building Codes in the US reference ASCE-7 for the design of the components and cladding of buildings (26.1.2.2 ASCE 7-10 & ASCE 7-16).