Elite Roof Panel Span Calculator

Important Message from Engineering Express

By clicking below, you agree that the use of this design aid is for estimating purposes only. Results are not valid for use & no construction or design shall be performed without the review and certification by a registered professional engineer.

No warranty or guarantee whatsoever is offered with any results obtained herein.


AGREE & CONTINUE
Use this calculator to determine clear spans for a variety of Elite roof panel & loading conditions.
Certified Copies for permit can be purchased by clicking below.

Elite EPS Panels v2
  Home - Elite Aluminum          
 
1lb and 2 lb Span Analysis Wall & Roof
SEE HELP & IMAGES AT BOTTOM -- HOVER/CLICK LABELS FOR TIPS
 
Enter allowable stress or ultimate design pressures, read corresponding results below. INPUT
PLEASE SELECT APPLICATION
Total factored live load such as snow or other code required loading LIVE LOAD
PSF
Typically the load of the roof panels, shingles, etc. DEAD LOAD
PSF
The bending limit of a member - see chapter 16 of the building code, typically L/180 for glass, L/60 for screen, L/240 for plaster DEFLECTION LIMIT
L/
Allowable Stress Design - where the capacity of the member in question is reduced to an allowable factored limit as opposed to ultimate where the load is factored up. OUTPUT USING ASD PRESSURES (see help)
    1-lb - 3" - 0.024" Alum. Skin
    1-lb - 3" - 0.032" Alum. Skin
    1-lb - 4" - 0.024" Alum. Skin
    1-lb - 4" - 0.032" Alum. Skin
    1-lb - 6" - 0.024" Alum. Skin
    1-lb - 6" - 0.032" Alum. Skin

INVALID WITHOUT
ENGINEER SEAL
    2-lb - 3" - 0.024" Alum. Skin
    2-lb - 3" - 0.032" Alum. Skin
    2-lb - 4" - 0.024" Alum. Skin
    2-lb - 4" - 0.032" Alum. Skin
    2-lb - 6" - 0.024" Alum. Skin
    2-lb - 6" - 0.032" Alum. Skin
The factored total force acting on a member. This is where the load value is factored up rather than reducing the allowable stress of a member in question. OUTPUT USING ULTIMATE PRESSURES (see help)
    1-lb - 3" - 0.024" Alum. Skin
    1-lb - 3" - 0.032" Alum. Skin
    1-lb - 4" - 0.024" Alum. Skin
    1-lb - 4" - 0.032" Alum. Skin
    1-lb - 6" - 0.024" Alum. Skin
    1-lb - 6" - 0.032" Alum. Skin

INVALID WITHOUT
ENGINEER SEAL
    2-lb - 3" - 0.024" Alum. Skin
    2-lb - 3" - 0.032" Alum. Skin
    2-lb - 4" - 0.024" Alum. Skin
    2-lb - 4" - 0.032" Alum. Skin
    2-lb - 6" - 0.024" Alum. Skin
    2-lb - 6" - 0.032" Alum. Skin
© Engineering Express
elite roof image
elite roof image

Elite Roof Panel Span Calculator

$90.00 – $130.00

Please select the state you would like the document certified in
Please choose whether this is for a multi-story building or not
This field can't be Empty
This field can't be Empty
Please choose the permitting party
This field can't be Empty
When choosing Sealed Hardcopy, maximum quantity is 1.
3 copies are sent per order.
Save up to an additional 33% by using tokens Learn more

As of November 1, 2024, All building departments in Broward county require files submitted to their online permitting portal to be formatted differently. Delray Beach requires the same type of formatting for our TERs instead of selecting individually seal each page.

Need the drawing earlier than 24 hours? We now have the option to expedite it for a fee! Please note expedited orders only applies to digitally signed and sealed documents during our business hours. Any orders placed over the weekend and or after business hours with the expedition fee will be applied to the next business day.

View Sample

Plan Format

Digitally Sealed Online-Only File, Raised Sealed Embossed Physical Copy
The document you are purchasing is a generic performance evaluation. Use of this document for any site-specific application is the responsibility of others. Installations beyond the performance limitations listed within the purchased document, any site-specific designs/certifications, or California-specific projects shall require custom engineering and invalidate the use of this evaluation. Learn more about the use of this document

Click here to request a quote for us to provide these services, which can also be provided by others who would then become responsible for the applicability of this evaluation. Contact Us if there are any questions and always consult with a design professional before using any generic performance evaluations with your project.

Related Plans

Scroll to Top