What wind information is required for construction documents?
From the 5th, 6th &7th Edition of the Florida Building Code (2014, 2017, 2020) section 1603.1.4 as well as from section 1603.1.4. of the 2012,
CERTIFIED EVALUATION REPORTS FOR PERMIT
Purchase these pre-engineered structural performance evaluation reports & receive an engineer-certified hardcopy or digital report for permit.
Each report contains information necessary for various wind & anchoring conditions. Samples are available to view.
Request a site specific engineering quote for custom needs outside the limits of these evaluations by clicking here.
Tradewinds: Type F Aluminum Generator Housing Unit Anchorage
$60.00 – $80.00
or ( 6 Tokens - 8 Tokens )View
Tradewinds: Type E Aluminum Generator Housing Unit Anchorage (TER 21-35932)
$60.00 – $80.00
or ( 6 Tokens - 8 Tokens )View
Tradewinds: TP-200 Aluminum Generator Housing Unit Anchorage.
$60.00 – $80.00
or ( 6 Tokens - 8 Tokens )View
Tradewinds: TP-100 Aluminum Generator Housing Unit Anchorage.
$60.00 – $80.00
or ( 6 Tokens - 8 Tokens )View
Tradewinds: TP-30 Aluminum Generator Housing Unit Anchorage.
$60.00 – $80.00
or ( 6 Tokens - 8 Tokens )View
Tradewinds: Type D Aluminum Generator Housing Unit Anchorage (TER 21-35927)
$60.00 – $80.00
or ( 6 Tokens - 8 Tokens )View
Need a certified concrete pad to mount your generator in a high wind condition?
Helpful Articles for Permitting
What is a TER and how is it used for permitting?
A TER or Technical Evaluation Report, is an engineering evaluation based on testing and/or rational analysis for the performance of a building product or component.
What doesn’t a TER or Master Plan Sheet do?
FIRST, WHAT IS A TER? TER’s or Technical Evaluation Reports are evaluations of a product’s performance. They are not intended to approve products for a
What do I do if a TER or Master Plan isn’t enough for a permit?
THE BUILDING DEPARTMENT WON’T ACCEPT MY TECHNICAL EVALUATION REPORT (TER)? Sometimes, municipalities or contract documents require more information than just submitting a TER (Technical Evaluation
What are Limitations of Small & Large Missile Impact Designs?
We are frequently asked what are the limitations applied on Small Missile Impact and Large Missile Impact products. Engineering Express takes into consideration the following
Technical Evaluation Report – TER – Types of Product Evaluations Typically Performed By Engineering Express
Engineering Express provides structural design evaluations of various types of mechanical equipment exposed to weather. There are four (4) evaluation types typically performed, each with
Search our AC model Database
Click Here to access our model database tool. You can filter by your AC brand, model, and number to find the TER report you need
Roof Mounted Equipment Height Requirements
In accordance with FBC 2020 (7th Edition), the following clearance below raised roof mounted mechanical units applies inside & outside the HVHZ*: WIDTH** OF MECHANICAL
Pros and Cons of Obtaining a Florida Statewide Approval Vs A Miami Dade Approval and how a TER fits in
Two common means of product evaluations in Florida are Florida Statewide Approvals (FSA’s) and Miami-Dade Notices of Acceptance (NOA’s). To help determine whether these evaluations
PRODUCT APPROVALS ARE NOT ALWAYS REQUIRED! HERE’S WHY:
HERE’S 3 MYTHS ABOUT PRODUCT APPROVALS: Background: Product evaluations (sometimes called “product approvals”, “ICC reports”, NOA’s or similar) for building components are the general
Performance Limitations for Mechanical Equipment & TER Certifications
Summary of Building Code & Research Intent The intent & provisions of the 2018 International Building Code (IBC), 2018 International Residential Code (IRC) & 2020
Metal Fasteners UNC vs Spaced Thread
Overview Metal fastening is designed per the requirements of the American Institute of Steel Construction (AISC): Specification for Structural Steel Buildings in conjunction with the
Master Plan Sheet – Product Evaluation – TER Explained
WHAT IS A MASTER PLAN SHEET / PRODUCT EVALUATION / TER? A master plan, also known as a product evaluation or TER (Technical Evaluation Report)
Learn About Rooftop & Ground Wind Forces for Mechanical Units
Want to learn how to design AC units on stands or curbs for wind design? Are you looking for tools to help in in design?
Instructions for proper use of rooftop equipment wind pressure calculator
HELP PAGE For the Engineering Express® Rooftop Equipment Wind Pressure Calculator Note: See Limitations & Conditions of Use at the end of this article. Quick
I see values for F1 and F2 on Evaluation Reports. What are they?
F1 and F2 are the limiting performance capacities of the forces in the parallel and perpendicular directions of a building component. Which one is which
How do I get a Certified TER or Master Plan Sheet?
FIRST, WHAT’S A CERTIFIED TER & Master Plan Sheet? TER’s or Technical Evaluation Reports and Master Plan Sheets must bear the original signature and raised
Florida Statewide Approvals (FSA) – Quality Assurance and Validator Requirements
About Validators & Quality Assurance Compliance It is often asked of us to explain the validator and quality assurance requirements of the Florida Statewide Product
FLORIDA PRODUCT APPROVAL AND MIAMI DADE NOA REQUIREMENTS
WHEN IS A FLORIDA PRODUCT APPROVAL OR MIAMI DADE NOA REQUIRED & HOW TER’S AND PERFORMANCE EVALUATIONS FIT IN FIRST, A WORD ABOUT FLORIDA PRODUCT
Did the wind loading requirements change for rooftop structures for ASCE 7-10 – 7-16 & The Florida Building Code?
Regarding ASCE 7-16 & the 2020 Florida Building Code (FBC) YES. Section 1609.1.1 and Chapter 35 of the 2020 FBC refer to ASCE 7-16
Case Study: Phantom Screens – Is a Florida Product Approval Required?
Product Approvals for building components are the general rule in Florida. Building officials, architects, insurance companies, even homeowners ask for them all the time, frequently