Directory of Firms We Work With & Refer Out To
Company Categories
Company Services
Company Locations
Company Keywords
This directory in no way endorses, recommends, or suggests that you engage with any companies listed herein. It is provided solely as a reference to assist you in your search for the right company to work with.
Engineering Express is not responsible, shall be affiliated with or held responsible in any way for any work you choose to perform with these companies. We recommend you thoroughly review your selection, carefully read contracts, and protect yourself from any business done with any firm. All work is at your own risk.
Select a filter on the left or search to see results.
GulfCoast Engineering, LLC
Structural Design Firm
Address: 3002 Del Prado Blvd. S. Unit B
Cape Coral, Florida 33904
Locations: Central Florida, South Florida, Western Florida
Summary
Gulfcoast Engineering is a full service Engineering firm that specializes in a variety of engineering and inspection services.
We are a local company, American owned and operated, with a diverse team of engineers, contractors, building inspectors, and consultants. We take pride in the work we do on every job, no matter how big or small. We are fully licensed to provide professional engineering services in Florida, Georgia, Alabama, Mississippi, Louisiana, and Texas.
Our mission is to provide professional, fair, ethical business practices to all of our clients. We also have a true old fashioned approach to business; we have accountability and responsibility for the work we provide, a virtue that America was built upon.
Aluminum Engineering Design
Pool Screen Enclosures Aluminum Screen Rooms Pan Roof Sun Room DesignsShow all
Hilti Field Engineer Support
Other Specialty Trade
Summary
Contact Rafael for support with Hilti anchor use throughout South Florida or to find a local rep elsewhere.
To find your local rep online: go to www.Hilti.com
Find: “SUPPORT AND DOWNLOADS” – “Sales Channels” – “DEDICATED ACCOUNT MANAGERS” – then you will see the following links to send an email requesting the information
You can also call directly to the 800-879-8000 and speak with a customer service representative to ask for the information.
Rafael can help specify anchors, field visits through S. Florida, assist with purchasing, offer approvals, use of PROFIS software, and more.
Show all
Gezelman PE
Mechanical-Electrical-Plumbing
Summary
ENGINEER ROOF LETTERS FOR MISSED PROGRESS INSPECTIONS
The senior PV & solar thermal design professional Allen Gezelman PE, LEED AP (Commercial Building Design & Construction), heads a TEAM of 3 engineers and 1 architectural-engineer which designs PV and solar thermal systems – in all aspects mechanical, electrical, plumbing and structural. Each TEAM member owns and runs his own independent business. TEAM members share a passion for renewable energy and for furthering the US national movement toward energy independence. TEAM members telecommute and create PV and solar thermal designs using IT over the internet.
Show all
Astro Shapes Custom Aluminum Extrusions
Other Specialty Trade
Summary
Astro-Shapes provides custom extrusions with low lead times, low rejection rates, with custom powder coating finishes to your specifications.
Our extrusions range from window extrusions, curtain walls, and glazing which are all offered with thermal breaks.
ASTRO-Sales-Brochure
WHO IS ASTRO SHAPES
The company was founded in 1971.
Founded in Struthers, Ohio. Owned by Monomoy Capital
Partners. Quality and service have long been the hallmark of
Astro Shapes.
Astro Shapes has grown into a 450,000-square-foot powerhouse that
produces 145 million pounds of extrusions annually.
400+ Employees
PACKAGING
Our extrusions range from window extrusions, curtain walls, and glazing which are all offered with thermal breaks.
ASTRO-Sales-Brochure
WHO IS ASTRO SHAPES
The company was founded in 1971.
Founded in Struthers, Ohio. Owned by Monomoy Capital
Partners. Quality and service have long been the hallmark of
Astro Shapes.
Astro Shapes has grown into a 450,000-square-foot powerhouse that
produces 145 million pounds of extrusions annually.
400+ Employees
PACKAGING
- All products are packed according to customer requirements and specifications.
- No bundle-to-bundle contact.
- Racks are stackable and nest within each other when empty.
- Returnable packaging supports the ‘’green’’ initiative by reducing environmentally unfriendly dunnage.
- Optimizes loading/unloading of shipments down to 30 minutes per load.
Show all
ACRC Atlantic and Carribbean Roof Consulting
Test Lab
Website: https://www.roofconsultant.net/
Address: Address
5001 N. Hiatus Road, Sunrise, FL 33351
Locations: Florida Statewide, South Florida
Summary
WE ASSIST
building owners, property managers, architects, engineers, contractors, project managers, and manufacturers in making better decisions, especially those facing the complex and stringent roofing standards of South Florida and the Caribbean. We also provide roof maintenance programs, inspections, quality assurance, roof system design, and project management to thousands of clients, managing millions of square feet of commercial roofing.
Show all
PRI Construction Materials Technologies LLC
Test Lab
Website: https://www.pri-group.com/
Address: 6412 Badger Drive
Tampa, FL 33610
Locations: Central Florida
Summary
PRI is a national and global leader in materials testing and performance. PRI provides independent, third-party testing, inspection, certification, and other technical services for roofing and other building envelope products.
We evaluate basic material properties, including:
We also conduct performance testing, including:
- Mechanical Properties
- Chemical & Compositional Properties
- Thermal Properties
- Optical Properties
- Accelerated Weathering
- Real-Time Exposure Weathering
- Oxidation & Corrosion Resistance
- Wind & Wind-Driven Rain Resistance
- Wind-Uplift Resistance
- Static & Cyclic Pressure Resistance
- Water & Air Penetration Resistance
- Impact Resistance
Show all
Blackwater Technical Services, Inc.
Test Lab
Contact: Michael Caldwell
Phone No: 561-508-2830
Services: Glazing Design, Inspection, or Testing, Inspections, Product Approval Evaluations
Website: https://blackwatertesting.com/
Address: 7341 Westport Place, Suite #1A
West Palm Beach, FL 33413
Locations:
Summary
Blackwater routinely performs the following building envelope testing:
- Impact Testing – small and large missile impacts are performed in various locations on the specimens, using pneumatic cannons, simulating hurricane or tornado windborne debris. Also, we provide ANSI Z97.1 safety glazing testing for assessment of safety when the glazing materials are broken by human contact.
- Cyclic Wind Pressure Loading – following impact testing, specimens are cycled to extremes of design pressures to ensure that the products do not experience gross structural failure (deglazing, etc)
- Structural Loading – static pressure loads are applied in both directions to determine the ability of the product to withstand design differential pressure loads (simulated wind loads), including an appropriate factor of safety. Deflections and permanent sets of structural members are measured and compared to allowable criteria.
- Operating Force and Forced Entry Resistance are determined per ASTM and AAMA Standards
- Water Penetration and Air Infiltration – water penetration and air infiltration tests are performed to ensure that the products are adequate for protection of the building envelope. Calibrated mass flow meters are utilized to determine the air infiltration at a given pressure. Water infiltration is determined utilizing calibrated nozzles to direct a water spray over the entire surface of the specimen while under differential pressure, simulating a storm environment.
- Dynamic – we can perform dynamic testing using a propeller driven wind and water stream on the specimens. This test is particularly useful for building codes or jurisdictions outside of hurricane wind zones.
- Structural Testing – racking, tensile, compression, cyclic loading, and cold creep testing of structural wall panels.
Show all
SZE Architects
Architect - Designer
Contact: Steve Epstein, AIA
Phone No: (561)999–9290
Services: Additions & Renovations, Commercial, New Construction, Residential
Website: https://www.szearchitects.com/
Address: 700 NE 74th St
Boca Raton, FL 33487
Locations: South Florida
Summary
Our projects include...
- Pre Site Plan/Due Diligence
- Site Planning
- Preliminary Design
- Design Development
- Bank Approval Sets
- Construction Documents
- Bid Review
- Construction Administration
- Special Inspections
- ...And More!
New construction: Custom single family homes, duplexes and town-homes, new retail and office buildings, warehouse and office/warehouse buildings, horse barns
Commercial and retail: Office space (tenant improvement), doctors’ and professional offices, large retail stores, small retail bays, restaurants, theaters
Additions: From single room to suites to two story, new garage or carport, new entry, new covered patio, new kitchens and baths
Remodels: Clubhouses, public spaces and lobbies, gyms, interior spaces of existing homes and condominiums, reconfigure existing rooms, update kitchens and baths
New Homes for Private Clients
We have designed luxury oceanfront residences, homes on the on the intracoastal and deep water canals and golf courses. Our portfolio includes private homes in the country and homes on small city lots, designed to maximize efficiency. But we never forget that the most important home to you is your home.Additions to Existing Homes
There is great value in buying an older home and updating it, not only as an investment, but also in terms of customizing the house for the way you live. A growing family might need an additional bathroom, or new bedrooms. A new entry feature or exterior facelift on an older house instantly adds value and curb appeal. Or add the feature you’ve always wanted, whether it’s a gym, an art studio or a new garage.Remodels of Existing Homes and Condominiums
Sometimes your best real estate option is the home you already own, with a few improvements. A modern, open kitchen makes entertaining and family gatherings easier and fun. Empty nesters suddenly have enough space for their dream master suite. A remodel can provide a new centerpiece for your residence and increase the comfort and enjoyment you get from your home. Our condominium remodels encompass not just individual apartments, but also public spaces such as card rooms, lobbies, offices, corridors and elevators, and span Palm Beach, Broward and Dade Counties, including: The Townhouses of Highland Beach, Chalfonte, The Aragon, Villa Magna, The Excelsior, One Thousand Ocean, Whitehall South, The Lakehouse, Turnberry Ocean Colony, Aqualina, The Beresford, Bellamare, Lake Point Towers, Summit Towers, The Galleon, Plaza South, Regency South, The Meridian, Boca Granada, Mizner Tower, Mirador 1000, The Voyager, Le Santuaire, Boca Mar, Sea Ranch Club, Points of America, Playa del Sol, The Fountainhead, The Fountains, Harborside, Abbey Delray, Boca Point Country Club, and many more. See all condominiumsRetail
Our clients include retail chains like Office Depot (over 100 stores, warehouses and sales offices), Mars Music (30 stores), Walgreens, Advance Auto, Stanton Optical, Eyeglass World and Lasik Vision Centers around the country, from new “ground-up” buildings to takeovers of existing retail spaces. We have done numerous retail build-outs for individual retail clients.Restaurants
Projects range from new restaurant build-outs in new retail centers, to restaurant remodels and corporate center “food court” style cafeteria, country club kitchens and dining rooms and frozen yogurt and sub shops.Commercial & Office
Our full range of services extends from site planning and zoning approval to final punch list, including construction documents for new multi-story office buildings and banks. Our tenant improvement projects range from small offices to doctors’ and professional office space to Fortune 500 corporate headquarters.Show all
JSR Design Group
Architect - Designer
Contact: John Reed, AIA
Phone No: (561) 362-7203
Services: Additions & Renovations, Commercial, New Construction, Residential
Website: https://jsrarchitecture.com/
Address: 1 West Camino Real, Suite #117E
Boca Raton, FL 33432
Locations: South Florida
Summary
Luxury home architects in South Florida with a diversity of professional architectural services
JSR Design Group, Inc. is headed by principal John S. Reed, Architect. We offer various Architectural Services including preliminary design, production of construction documents, and construction administration. We take pride in our personal approach and attention to detail that each client receives throughout the project.
Our South Florida design studio of Architects, Designers, and Construction Management professionals have successfully impacted the South Florida community through our extensive network of contractors, real estate firms, small business owners, and private homeowners.
Our design collaborative of creative, dedicated professionals provide in-depth knowledge and dependable expertise for every type of project on time and on budget. Concept driven and technologically armed, projects are brought to life to enhance our visual environment while maximizing efficiency.
Show all
Skyscraper Construction
Contractor
Website: https://www.skyscrapercm.com
Address: Juan Perilla
Business Development
FL CGC 1531215 | Skyscraper Construction
P: 786-220-6915 | C: 954-505-0849
Locations: Central Florida, South Florida
Summary
BUILDING ENVELOPE SERVICES
Includes but not limited to;
1. Stucco and EIFS repairs
2. Facade re-construction 3.Investigative and testing assistance
4. Mansory repairs
5. Exterior cladding system repairs
6. New Cladding systems
7. 40/50 Year re-certification repairs
alongside the Engineer-of-record
Show all