Eastern Metal Supply© Self Mating & Cap And Pan Decking Calculator

Important Message from Engineering Express

By clicking below, you agree that the use of this design aid is for estimating purposes only. Results are not valid for use & no construction or design shall be performed without the review and certification by a registered professional engineer.

No warranty or guarantee whatsoever is offered with any results obtained herein.


AGREE & CONTINUE

This calculator allows you to determine the maximum span of various EMS self mating & cap and pan decking profiles after entering the appropriate design criteria.

Eastern Metal Supply Self Mating & Cap and Pan Decking Calculator v7
                       Self Mating & Cap and Pan Decking Calculator (ASD)
                        ASCE 7     Version v7      9/05/19
Loading
Positive Wind Pressure (Ult):
Enter Ultimate wind pressure, value must be positive
psf
Negative Wind Pressure (Ult):
Enter Ultimate wind pressure, value must be negative
psf
Live Load: psf
Dead Load: psf
Roof Snow Load: psf
Decking
Clear Span: ft
Deflection Limit: L/60 Per FBC and IBC Table 1604.3 Footnote h
ASD Load Combinations

INVALID WITHOUT
ENGINEER SEAL

Effective Combinations:
Gravity:
Uplift:
1.
2.
3.
4.
5.
6a.
6b.
7.
8.
Legend:
D = Dead Load Lr = Roof Live Load S = Snow Load W = Wind Load

INVALID WITHOUT
ENGINEER SEAL

Decking Capacity

TO SAVE YOUR WORK:

1) Click the red “SAVE, SHARE & SYNC” button above.

2) Enter a key phrase or word in the “secret key” field and click the blue “Connect” button. You are connected if the white cloud turns green.

3) Return to your project by clicking the red “SAVE, SHARE & SYNC” Sync button, entering your secret key, and clicking the blue “Connect” button.

Share your project by clicking “Share the Link” after connecting and copying the link to send to coworkers, colleagues, and clients!
Eastern Cap and Pan Span Calculator
Eastern Cap and Pan Span Calculator

Eastern Metal Supply© Self Mating & Cap And Pan Decking Calculator

Related Plans

Scroll to Top