Elite Roof Panel Span Calculator

Important Message from Engineering Express

By clicking below, you agree that the use of this design aid is for estimating purposes only. Results are not valid for use & no construction or design shall be performed without the review and certification by a registered professional engineer.

No warranty or guarantee whatsoever is offered with any results obtained herein.


AGREE & CONTINUE
Use this calculator to determine clear spans for a variety of Elite roof panel & loading conditions.
Certified Copies for permit can be purchased by clicking below.

Elite EPS Panels v2
  Home - Elite Aluminum          
 
1lb and 2 lb Span Analysis Wall & Roof
SEE HELP & IMAGES AT BOTTOM -- HOVER/CLICK LABELS FOR TIPS
 
Enter allowable stress or ultimate design pressures, read corresponding results below. INPUT
PLEASE SELECT APPLICATION
Total factored live load such as snow or other code required loading LIVE LOAD
PSF
Typically the load of the roof panels, shingles, etc. DEAD LOAD
PSF
The bending limit of a member - see chapter 16 of the building code, typically L/180 for glass, L/60 for screen, L/240 for plaster DEFLECTION LIMIT
L/
Allowable Stress Design - where the capacity of the member in question is reduced to an allowable factored limit as opposed to ultimate where the load is factored up. OUTPUT USING ASD PRESSURES (see help)
    1-lb - 3" - 0.024" Alum. Skin
    1-lb - 3" - 0.032" Alum. Skin
    1-lb - 4" - 0.024" Alum. Skin
    1-lb - 4" - 0.032" Alum. Skin
    1-lb - 6" - 0.024" Alum. Skin
    1-lb - 6" - 0.032" Alum. Skin

INVALID WITHOUT
ENGINEER SEAL

    2-lb - 3" - 0.024" Alum. Skin
    2-lb - 3" - 0.032" Alum. Skin
    2-lb - 4" - 0.024" Alum. Skin
    2-lb - 4" - 0.032" Alum. Skin
    2-lb - 6" - 0.024" Alum. Skin
    2-lb - 6" - 0.032" Alum. Skin
The factored total force acting on a member. This is where the load value is factored up rather than reducing the allowable stress of a member in question. OUTPUT USING ULTIMATE PRESSURES (see help)
    1-lb - 3" - 0.024" Alum. Skin
    1-lb - 3" - 0.032" Alum. Skin
    1-lb - 4" - 0.024" Alum. Skin
    1-lb - 4" - 0.032" Alum. Skin
    1-lb - 6" - 0.024" Alum. Skin
    1-lb - 6" - 0.032" Alum. Skin

INVALID WITHOUT
ENGINEER SEAL

    2-lb - 3" - 0.024" Alum. Skin
    2-lb - 3" - 0.032" Alum. Skin
    2-lb - 4" - 0.024" Alum. Skin
    2-lb - 4" - 0.032" Alum. Skin
    2-lb - 6" - 0.024" Alum. Skin
    2-lb - 6" - 0.032" Alum. Skin
© Engineering Express

Elite Roof Panel Span Calculator

$80.00

This field can't be Empty
This field can't be Empty
Scroll to Top