Savannah Trims Flood Log Calculator

Important Message from Engineering Express

By clicking below, you agree that the use of this design aid is for estimating purposes only. Results are not valid for use & no construction or design shall be performed without the review and certification by a registered professional engineer.

No warranty or guarantee whatsoever is offered with any results obtained herein.


AGREE & CONTINUE
Savannah Trims Flood Log Calculator v3
B.O.S.S. & FLOOD BOARDS
HYDROSTATIC, HYDRODYNAMIC, BREAKING WAVES, AND IMPACT LOADS  
Flood Information:
BFE ft, Base Flood Elevation Breaking Waves?
FB ft, Free Board
dh Surcharge Depth Debris Impact?
Hb Breaking Wave Height
DFE Design Flood Elevation V Zone / Coastal A Zone?
F.F. ft, Finished Floor
h Design Flood Height
V
Zachary A. Rubin, P.E.:
Enter 4.99 ft/s for hydrostatic only.
Per ASCE 7-10 5.4.3, the maximum water velocity for hydrodynamic analysis is 10 ft/s.
ft/s, Design Water Velocity
W lbs, Debris Weight
Structure Information:
Flood Design Criteria:
Risk Category
Hydrostatic Pressure:
Upstream Screening
psf
Building Structure
Hydrodynamic Pressure:
psf
Wind Information:
Breaking Wave Pressure:
Wind Pressure psf
psf
Debris Impact Force:
lb
HORIZONTAL CHANNELS
Member Size:
Panel Width: ft
Deflection Limit: L /

INVALID WITHOUT
ENGINEER SEAL

Bending Moment Check:
Deflection Check:
FLOOD BOARD EXTRUSIONS
Member Size: 3.5"x16" 6005A-T61
Panel Width: ft
Deflection Limit: L /

INVALID WITHOUT
ENGINEER SEAL

Bending Moment Check:
Deflection Check:
FLOOD BOARD TUBES
Member Size:
Panel Width: ft
Deflection Limit: L /

INVALID WITHOUT
ENGINEER SEAL

Bending Moment Check:
Deflection Check:
SQUARE/RECTANGULAR POSTS
Member Size:
Critically Welded
Member Spacing: in O.C.
Deflection Limit: L /

INVALID WITHOUT
ENGINEER SEAL

Bending Moment Check:
Deflection Check:
I-BEAM POSTS
Member Size:
Member Spacing: in O.C.
Critically Welded
Deflection Limit: L /

INVALID WITHOUT
ENGINEER SEAL

Bending Moment Check:
Deflection Check:
SURFACE MOUNT
Anchor Type:
Anchor Embed. And Edge Distance:
Anchor Spacing: in
Reactions for HILTI PROFIS:
Post Spacing: in O.C.
Moment (LRFD):

INVALID WITHOUT
ENGINEER SEAL

lb-in
Anchor Unity Check:
Shear (LRFD):
lb

Savannah Trims Flood Log Calculator

Scroll to Top