Roof Panel

ex logo

ASCE 7 Main Wind Force vs. Components & Cladding Explained (MWFRS vs. C&C)

ASCE 7 separates wind loading into three types: Main Wind Force Resisting System (MWFRS), Components and Cladding (C&C), and Other Structures and Building Appurtenances. MWFRS is defined as “(a)n assemblage of structural elements to provide support and stability for the overall structure.” Typically, members that receive loading from two surfaces are designed to resist MWFRS …

ASCE 7 Main Wind Force vs. Components & Cladding Explained (MWFRS vs. C&C) Read More »

ex logo

Wind Speed to Wind Pressure For Sunrooms – Canopies – Pergolas Using ASCE 7-16

ASCE 7-16 is introduced into the 2018 International Building Code and 7th Edition Florida Building Code (2020) as the new referenced standard for wind design. This standard introduced an enhanced section for the conversion of wind velocities to roof wind pressures for roof components attached to buildings and freestanding structures such as sunrooms, overhead canopies, …

Wind Speed to Wind Pressure For Sunrooms – Canopies – Pergolas Using ASCE 7-16 Read More »

Engineering Express Icon

Glossary of Engineering Terms

Glossary of Building Component Engineering Terms & Abbreviations These terms are published by Engineering Express to coincide with help menus for our online tools & published articles and as they relate to the Building Component Design industry. See also our FLOOD ENGINEERING GLOSSARY for more terms related to flood engineering. See Also SUNROOM TERMINOLOGY for …

Glossary of Engineering Terms Read More »

ex logo

What is the Minimum Roof Slope for Metal Panels and other Roof Types?

The minimum roof slope requirement for metal panels varies depending on panel connection conditions.  The required roof slope varies with application of materials and use. See the below Florida Building Code 7th Edition (2020) sections below to determine which slope is appropriate based on your specific design scenario.   Definition METAL ROOF PANEL. An interlocking …

What is the Minimum Roof Slope for Metal Panels and other Roof Types? Read More »

Scroll to Top