Fence - Rail - Gate - Engineering Express®

How To Use Master Plans – TER’s – Calculator Reports Purchased From Engineering Express

READ BELOW BEFORE USING PLANS PURCHASED FROM ENGINEERING EXPRESS FOR YOUR PROJECT General Information: The documents you receive contain a physical or digitally certified engineer seal. They are intended to be used to assist in obtaining a building permit and construct the component conveyed in the plan. In all cases, additional documentation is required …

How To Use Master Plans – TER’s – Calculator Reports Purchased From Engineering Express Read More »

Loss of Capacity Due To Welded Aluminum In Railings – Signs – Structures

Regarding any aluminum railing project, it is imperative to understand the life-safety issue that arises when welding an aluminum railing or sign post. For example, a rail is classified as a life-saving fall guard for any elevation above 31 inches above grade. The aluminum alloys normally used (such as 6061-T6) get their strength from a …

Loss of Capacity Due To Welded Aluminum In Railings – Signs – Structures Read More »

Is A Top Rail Required For A Glass Railing?

Aesthetically pleasing, clean and one of the biggest architectural trends, the glass railing is fast gaining popularity as a go-to safeguard barrier for modern construction. It’s not only a widely used structural component for safeguard applications, but one with many variables and configurations that changes the way that they need to be analyzed in order …

Is A Top Rail Required For A Glass Railing? Read More »

What wind information is required for construction documents?

From the 5th, 6th &7th Edition of the Florida Building Code (2014, 2017, 2020) section 1603.1.4 as well as from section 1603.1.4. of the 2012, 2015, & 2018 International Building Code, construction documents shall show the following: Ultimate design wind speed, Vult (3-second gust), miles per hour and nominal design wind speed (Vasd) as …

What wind information is required for construction documents? Read More »

About The UL 325 Safety Standard for Gate Operators

The UL 325 is a safety standard for door, drapery, gate, louver, and window operators and systems. The standard was developed by underwriters laboratories Inc. in an open non-exclusionary process for manufacturers to use in designing products. This standard provides minimum requirements for the manufacture and installation of gate operators. It applies to electric operators …

About The UL 325 Safety Standard for Gate Operators Read More »

Metal Fasteners UNC vs Spaced Thread

Overview Metal fastening is designed per the requirements of the American Institute of Steel Construction (AISC): Specification for Structural Steel Buildings in conjunction with the American Architectural Manufacturers Association (AAMA): TIR-A9-14 Design Guide for Metal Cladding Fasteners. Types The two most common types of fastener threads used in construction are Unified Coarse Thread (UNC) more …

Metal Fasteners UNC vs Spaced Thread Read More »

2015/2018 IRC RAILING GUIDELINES

The 2015/2018 International Residential Code (IRC)… contains railing guidelines similar to those found in the Florida Building Code 6th & 7th Edition (2017, 2020). Below are selected regulations from the 2018 IRC for reference as they are typically used on our safeguard projects. Helpful 2018 IRC PDF also appears by clicking here (courtesy Safebuilt Colorado) …

2015/2018 IRC RAILING GUIDELINES Read More »

Designing Interior Glass? Here are some engineering code items to consider

There’s more to consider when designing interior glass than just how it looks. Turns out there are quite a few design and safety factors to adhere to. In accordance with both the International and Florida Building Codes (IBC 2018 & FBC 2017/2020): Regarding differential horizontal movement: (Section 2403.4) Interior Glazed Areas: Where interior glazing is …

Designing Interior Glass? Here are some engineering code items to consider Read More »

Where To Buy Extrusions & Parts

We’re frequently asked by our clients where they can purchase many of the products specified in our plans. Below is a growing list of products1 for your reference. FEATURING PRODUCTS BY: CLICK ON THE LINKS BELOW TO FIND THE PRODUCT(S) YOU ARE LOOKING FOR: General Extrusions Eastern Metal Supply Standard Extrusion & Sheet Products Eastern …

Where To Buy Extrusions & Parts Read More »

About Porosity & When is a Fence or Railing 75% Open?

The Scenario The question comes up from time to time regarding requirements for a fence or railing to be 75% open (such as in the Lighthouse Point FL Building Code Amendments). This is the case for example in Florida when overlooking the Intracoastal in Broward County. This porosity also affects the design calculations for the …

About Porosity & When is a Fence or Railing 75% Open? Read More »

Cookie	Duration	Description
cookielawinfo-checkbox-analytics	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics".
cookielawinfo-checkbox-functional	11 months	The cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional".
cookielawinfo-checkbox-necessary	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary".
cookielawinfo-checkbox-others	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other.
cookielawinfo-checkbox-performance	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance".
viewed_cookie_policy	11 months	The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data.

Tags: Fence - Rail - Gate