Beware of Snow Buildup On Open Roofs An important and frequently overlooked requirement for checking snow loads on open roof
ENGINEERING SUPPORT CHANNEL
Dedicated Engineering Assistance for Outdoor Elements' Dealers Brought To You By Engineering Express®
DEALERS NEEDING CUSTOM DRAWINGS FOR PERMIT
Register with Engineering Express to design & certify your next project
Guaranteed Competitive Pricing
Fast Turnaround Times
Professional, Personal Service
-We Created The Engineering & Know Best –
Dealers: Purchase Non-Site Specific Performance Evaluations
*If ordered before noon Eastern time, otherwise typically next day for digital copies. Hardcopies are sent via UPS ground as standard shipping unless upgraded. Each evaluation is valid for one location/permit only.
An Access Code is required to view & purchase. It is available on your Outdoor Elements Dealer Portal Page or contact Outdoor Elements To access.
Call or Text
Engineering Express For Help
Want To Become A Dealer?
Helpful Knowledge Base Articles
Articles to help StruXure & general Outdoor Spaces installers & designers curated from permitting, engineering, and general design needs.
READ BELOW BEFORE USING NON SITE-SPECIFIC PERFORMANCE EVALUATIONSFROM ENGINEERING EXPRESS FOR YOUR PROJECT General Information About Non Site-Specific Plans: Certified
How do you get from a T5 to T6 temper? Heat treatment is done by raising the alloy temperature to
A canopy is a structure which provides overhead protection from the elements such as rain, snow, or sunlight. Canopies can
This is provided to inform clients of the dissimilar metal protection requirements of the 2015 Aluminum Design Manual, Chapter M
When an anchor is installed into concrete, there is an area surrounding the anchor called a cone of influence in
Canopies & Wind Understand this – A backyard canopy attached to the back of your house, a pergola/trellis, or
CHECKLIST OF DESIGN ITEMS NEEDED FOR SCREENED ENCLOSURES, OPEN, & ENCLOSED PATIOS, PERGOLAS & SUNROOMS Engineering Express provides signed &
From the 5th, 6th &7th Edition of the Florida Building Code (2014, 2017, 2020) section 1603.1.4 as well as from
ASCE 7-16 is introduced into the 2018 International Building Code and 7th Edition Florida Building Code (2020) as the new
Perforated Design Method vs. Segmented Design Methods for Shear Walls The International Building Code (2018) defines a shear wall
About TEK Screws The following information is complied compliments of All Points Fasteners, Totally Nuts And Bolts, and Fastenermart Tek® screws, which
Here’s a chart illustrating some of the many dimensions and components needed to design a site specific open patio /
Per the Aluminum Design Manual (ADM) 2015, the allowable bending stress of round tubes shall be determined for the limit