How To Determine Uplift Reactions For Canopies-Carports-Pergolas
Canopies & Wind Uplift – An Introduction First, Understand This A backyard canopy or pergola, trellis, or a lightweight sunroom/screen room attached to the back
SUNDANCE PERGOLA
Engineering Resources For The Sundance Family of Products
No matter the weather, Sundance can help you control it. Engineering Express will help you design your own Sundance pergola and provide a drawing set and calculation package upon request.
Purchase Pre-Engineered
Performance Evaluation Plans
Use the link to the right to view and purchase certified plans for permit for the Sunance Louvered Roof System.
Use these plans along with your design professional’s site-specific plan to obtain a building permit & construction guidelines.
-
Sundance Louvered Roofs: Aluminum Louvered Roof Performance Evaluation
$170.00 – $220.00
or ( 17 Tokens - 22 Tokens ) View
Tour Sundance Pergola Styles
Installers Needing Custom Plans For Permit
Register with Engineering Express to design your next project
Guaranteed Competitive Pricing
Fast Turnaround Times
Professional, Personal Service
Value-Engineered Projects
-We Created The Engineering & Know Best –
Existing VIP Clients, Login Here For Access To VIP Quoting, Pricing, & Project Management
Other Helpful Resources
Help Center
Frequently asked questions about Sunrooms, Evaluations, Codes, and more.
Sunroom Terminology
The following is a summary of sunroom-related terms provided courtesy of the National Sunroom Association. Click Here for the official publication provided by the
ASCE 7 WIND EXPOSURE CATEGORIES AND HOW EXPOSURE ‘D’ WORKS
Wind Exposure Category Overview ASCE-7 is the governing referenced standard for design loads on buildings & other structures for building codes throughout the US. ASCE
How To Use Performance Evaluations – TER’s – Calculator Reports Purchased From Engineering Express
READ BELOW BEFORE USING NON SITE-SPECIFIC PERFORMANCE EVALUATIONSFROM ENGINEERING EXPRESS FOR YOUR PROJECT General Information About Non Site-Specific Plans: Certified Performance Evaluations (also referred to
What’s the difference between aluminum T5 and T6 temper (like 6063-T5 vs 6063-T6 alloy)?
How do you get from a T5 to T6 temper? Heat treatment is done by raising the alloy temperature to about 980 degrees F and
About AAMA 2100 and Sunroom Categories
Sunrooms across the US are categorized into 5 categories. AAMA published these in their AAMA/NPEA/NSA 2100-12 publication which made its way into the Florida &
Why are spacing, edge distance, and embedment important for concrete anchors?
When an anchor is installed into concrete, there is an area surrounding the anchor called a cone of influence in which the anchor is affecting
Types of At-Grade Footings Explained
Here’s a description and illustrations we’ve created for footing types we frequently reference in our work for sunrooms, pergolas, carports, screen rooms, signs, and similar
CHECKLIST FOR SCREENED ENCLOSURES, OPEN, & ENCLOSED PATIOS – SUNROOMS
CHECKLIST OF DESIGN ITEMS NEEDED FOR SCREENED ENCLOSURES, OPEN, & ENCLOSED PATIOS, PERGOLAS & SUNROOMS Engineering Express provides signed & sealed design plans for various
What wind information is required for construction documents?
From the 5th, 6th &7th Edition of the Florida Building Code (2014, 2017, 2020) section 1603.1.4 as well as from section 1603.1.4. of the 2012,
Glossary of Engineering Terms
Glossary of Building Component Engineering Terms & Abbreviations These terms are published by Engineering Express to coincide with help menus for our online tools &
Metal Fasteners UNC vs Spaced Thread
Overview Metal fastening is designed per the requirements of the American Institute of Steel Construction (AISC): Specification for Structural Steel Buildings in conjunction with the
Wind Speed vs. Wind Pressure Explained
Many don’t understand how wind works & state that a product is rated to a specific wind speed. This is false advertising & not true.
TEK Sheet Metal Screws (SMS) – About – Sizes – Gauges
Tek® screws have become an essential tool in construction and manufacturing, valued for their self-drilling capabilities that simplify a variety of projects. These screws eliminate
Where To Buy Extrusions & Parts
We’re frequently asked by our clients where they can purchase many of the products specified in our plans. Below is a growing list of products1
Frost Protection For Concrete Footings On Grade – Heave Explained
Footings Move When Soil Freezes. Let’s Explain. Building codes describe the design requirements of shallow foundations in regions where soil is subjected to seasonal ground
Procedure For Calculating Aluminum Box Beams For Bending
Per the Aluminum Design Manual (ADM) 2015, the allowable bending stress of round tubes shall be determined for the limit states of yielding, rupture, and